K6050 & KG6050 – Portable Analyzer

Measured gas

Argon – Ar, Carbon Dioxide – CO2, Helium – He, Hydrogen – H2, Neon – Ne, Xenon – Xe



  • Description


  • Wide range of gases monitored, including hydrogen, carbon dioxide, argon and SF6
  • Optional oxygen measurement
  • Rugged and portable
  • Fast warm-up with rapid response time
  • Weatherproof to IP67

Hitech K6050 Series analysers accurately measure the changes of one constituent in binary or pseudobinary gas mixtures (ie, mixtures in which only one constituent changes). Examples include hydrogen, carbon dioxide, argon, helium and various halogenated hydrocarbons such as the Freons. Almost any single constituent of a gas mixture can be measured, providing its thermal conductivity differs from that of the other components. The ranges provided depend upon the gas being measured but can be from high ppm to 100%.

A non-depleting katharometer sensor measures the thermal conductivity of the gas. The sensor incorporates a highly sensitive element of low thermal capacity, which requires no maintenance. Signal processing is provided by a microprocessor to give a level of accracy and a range not normally associated with this type of sensor. Little or no calibration is required because of the system’s inherent high stability.
A built-in sample pump means that samples can be drawn from low-pressure sources or can be naturally aspirated. An integral needle valve and flow indicator are used to control the sample flow through the analyser.

Dual-gas measurement is provided by the KG6050. It combines the measurement abilities of the K6050 with oxygen measurement by electrochemical cell. Concentration ranges from 100ppm to 100% of oxygen are available, depending on the application.

True portability is achieved from sealed rechargeable batteries, which offer 6 hours continuous operation. Extended operation is possible by running the unit with the battery charger connected.
The whole instrument is housed in a tough co-polymer waterproof case with carrying handle.
A large, alphanumeric LCD shows measured values and also displays messages and prompts for the menudriven configuration and calibration routines. These procedures are simple and straightforward.

    Request information

    Fill out the form without obligation, you will be contacted as soon as possible by one of our advisors that will provide you with the information you seek

    I express my free, specific, informed and unequivocal intention to accept the treatment of personal data concerning myself.