MultiXplo DM-TX6 – Catalytic detectors

Tecnology

Oxycol (TM)

Measured gas

Argon – Ar, Butane – C4H10, Ethylene – C2H4, Hydrogen – H2, Methane – CH4

Manufacturer

Simtronics

  • Description

Description

MultiXplo – Catalytic Gas detector

Our catalytic detectors are known for their accuracy, fast response and high reliability. MultiXplo DM-TX6 is the solution for applications requiring catalytic detectors, like high temperature environments and hydrogen detection. The unique hand held remote terminal (IR) is a powerful maintenance tool available for the TX63 series.

Features
OXYCOL (TM) catalytic sensor

The measurement process is based on OXYCOL (TM) low temperature catalytic oxidation, improving detection flammable gases and gives the detector an extremely long lifetime. This technology also improves the resistance to catalytic poisons.

Simplicity

The interchangeable and removable cartridges simplifies maintenance.

Remote control

All controls, configurations and readouts are remotely accessible from the infrared remote controller.

An autonomous detector

The digital processing linearises the measurement signal before transmitting it to a gas detection unit or plant automatic control system. Detectors have both analog and contact outputs.

Application

The large detection spectrum enables the use of the oxydation catalytic sensor in a large scope of applications such as: Storage of flammable materials, petrochemicals, LNG/LPG, automobile industry, chemicals, pharmaceuticals, aerosols, etc. The low cost of catalytic oxidation sensors in semi-industrial applications such as: Battery loading premises, boiler rooms, pharmaceutic laboratories, etc.

Specification
General
Technology Low temperature oxidation process, OxycolTM
Detects Flammable Gases
Range 0 to 100% LEL
Calibration with calibration gas
Performance
Response time T90 < 10 s (Methane)
Zero drift +/- 3% Full scale deflection
Accuracy +/- 5% Full scale deflection
Repeatability +/- 1% Full scale deflection
Sensor life Better than 5 years
Output Signal
Standard 4-20mA, max. load impedance 700? (Std.)
[600? with optional LCD display]
2 x configurable Relays max 1A / 30V
option 0-22mA (Option for PLC’s)
option Lonworks (Syntel)
Electrical
Power supply 24V DC, range (18 – 32V DC)
Power consumption 55 mA normal
Connection 0.3 mm2 (22 AWG) – 2.5 mm2 (12 AWG)
Environmental
Storage -40°C to +70°C
Operation -20°C to +60°C
Humidity 0 to 95% RH (non-condensing)
Pressure Atmospheric pressure +/- 10%
Ingress IP66
RFI/EMI Complies with EN50081-1, EN50081-2,
EN50082-1 and EN50082-2.
Housing
Material Epoxy coated aluminium (standard)
316 L stainless steel (option)
Approvals
ATEX ATEX II 2 G EEx d II C T6
Certificate number LCIE03ATEX6262X
IECEx IECEX LCI09.0018

 

    Request information

    Fill out the form without obligation, you will be contacted as soon as possible by one of our advisors that will provide you with the information you seek

    I express my free, specific, informed and unequivocal intention to accept the treatment of personal data concerning myself.

    ×